RADVision Scopia Elite 5100 Series Guida di Installazione Scaricare il pdf (Pagina 41)

Performing the MCU Initial Configuration | 37

RADVISION | Installation Guide for SCOPIA Elite 5100 Series MCU Version 7.7

Figure 5-6 The Status Map showing the Gatekeeper connection

d. Verify that the MCU is connected to the Ethernet.

e. Verify that the MCU is connected to the Gatekeeper.

Configuring SIP Server Settings

You can configure settings for SIP server profiles which set how the MCU and the registrar interact.

Depending on connection types supported by the SIP server, MCU supports these transport

connection types for sending messages to SIP server:

• UDP

• TCP

• TLS

Procedure

Step 1 Select Configuration .

Step 2 Select Protocols.

Step 3 Select Enable SIP protocol to enable MCU communication with the SIP server.

Step 4 Enter the SIP domain of the MCU in the Default SIP domain field as defined in the SIP server.

An example of a SIP domain is company.com.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 56 57

Nessun commento

RADVision Scopia Elite 5100 Series Guida di Installazione Pagina 41