RADVision SCOPIA XT4000 Series Guida di Installazione Scaricare il pdf (Pagina 62)

Step 8

Select Addresses under GLAN.

Figure 5-20 Configuring IP addresses

Step 9

Set the fields as described in Table 5-13 on page 57.

Table 5-13 Configuring IP addresses

Field Name Setting

MAC address This setting cannot be changed.

Automatic IP address Set to Yes (default) if the system gets its IP address automatically.

If the XT Codec Unit is connected to the Internet and you must set

up a static public IP address in the IP address field, set this field to

No; the other fields in this page become programmable.

IP address If the system gets its IP address automatically, indicates the IP

address assigned to the system. Otherwise enter the system static IP

address here.

Subnet mask If the system gets its IP address automatically, indicates the subnet

mask assigned to the system. If you entered the system’s IP address

manually, type the subnet mask.

Gateway IP address If the system gets its IP address automatically, this field indicates

the gateway IP address assigned to the system. If you entered the

system’s IP address manually, type the gateway IP address.

DNS server IP address If the system gets its IP address automatically, this field indicates

the DNS server IP address assigned to the system. If you entered the

system’s IP address manually, type the DNS server IP address.

Step 10

Select Save.

RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 57

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 90 91

Nessun commento

RADVision SCOPIA XT4000 Series Guida di Installazione Pagina 62